Specifications - Sharp XL-MP100H Operation Manual

Specifications

XL-MP100H
As part of our policy of continuous improvement, SHARP reserves
the right to make design and specification changes for product
improvement without prior notice. The performance specification fig-
ures indicated are nominal values of production units. There may be
some deviations from these values in individual units.
! General
Power source AC 230 - 240 V, 50 Hz
Power Power on: 107 W
consumption
Power stand-by: 0.6 W
Dimensions Width: 160 mm (6-5/16")
Height: 228 mm (9")
Depth: 248 mm (9-13/16")
Weight 4.2 kg (9.3 lbs.)
! Amplifier
Output power MPO: 150 W (75 W + 75 W) (10 % T.H.D.)
RMS: 100 W (50 W + 50 W) (10 % T.H.D.)
RMS: 75 W (37.5 W + 37.5 W)
(0.9 % T.H.D.)
Output terminals Speakers: 6 ohms
Headphones: 16 - 50 ohms
(recommended: 32 ohms)
CD digital output (optical)
Input terminals Video/Auxiliary (audio signal): 500 mV/47 k
ohms
! Tuner
Frequency range FM: 87.5 - 108 MHz
AM: 522 - 1,620 kHz
34
! CD player
Type Compact disc player
Signal readout Non-contact, 3-beam semiconductor laser
pickup
D/A converter 1-bit D/A converter
Frequency 20 - 20,000 Hz
response
Dynamic range 90 dB (1 kHz)
! Cassette deck
Frequency 50 - 14,000 Hz (normal tape)
response
Signal/noise ratio 50 dB (recording/playback)
Wow and flutter 0.25 % (WRMS)
! Speaker
Type 2-way type speaker system
4 cm (1-9/16") semi dome tweeter
9 cm (3-9/16") woofer
Maximum input 100 W
power
Rated input power 50 W
Impedance 6 ohms
Dimensions Width: 132 mm (5-3/16")
Height: 228 mm (9")
Depth: 197 mm (7-13/16")
Weight 2.0 kg (4.4 lbs.)/each
04/1/28 XL-MP100H(A)3.fm
TINSEA014SJZZ