Sharp XL-MP100H Operation Manual page 13

To interrupt playback:
Main unit operation:
Press the button.
To resume playback from the same
point, press the button again.
Remote control operation:
Press the button.
To resume playback from the same point, press the
To stop playback:
Press the button.
To remove the disc:
Whilst in the stop mode, press the OPEN/CLOSE
Caution:
! Do not place two CDs in one disc tray.
! Do not play discs with special shapes (heart- or octagon-shaped)
as it may cause malfunctions.
! Do not push the disc tray whilst it is moving.
! If the power fails whilst the tray is open, wait until the power is
restored.
! If a disc is damaged, dirty, or loaded upside down, the disc will
skip or not play.
! Subjecting the unit to shock or vibration may cause mistracking.
! If TV or radio interference occurs during CD operation, move the
unit away from the TV or radio.
" To change the display (MP3 discs only)
Whilst in the stop mode or playback mode, press the MP3 DISPLAY
button.
Each time the button is pressed, the display will change as follows.
[When in the stop mode]
button.
Total number of tracks
button.
[When in the playback mode]
Track number Elapsed playback
time
04/1/28 XL-MP100H(A)1.fm
Folder name
Track name
Folder name
Track name
TINSEA014SJZZ
XL-MP100H
4
13