A A A A
Press the operation switch to make the On indicator light up.
❒
If the power is not turned on when the operation switch is pressed, check
the main power switch is on. If off, turn it on.
A A A A
Press the operation switch to make the On indicator go out.
❒
Even if you press the operation switch, the indicator remains lit and blinks
in the following cases:
• When communication with external equipment is in progress.
• When the hard disk is active.
❒
Do not turn off the main power switch when the On indicator is lit or blink-
ing. Doing so may result in damage to the hard disk or memory, leading to
malfunction.
❒
Pull out the power cord after turning off the main power switch. Not doing
so may result in damage to the hard disk or memory, leading to malfunction.
A A A A
Make sure the On indicator is unlit.
B B B B
Turn off the main power switch.
Make sure that the main power indicator goes out.
25