Crosley CFD28WIS3 Use & Care Manual page 8

4
Lift the door while adjusting the washer. To raise
the door, rotate washer clockwise (when viewed
from the bottom). To lower door, rotate washer
counterclockwise (when viewed from the bottom).
RaisinglLowering Door
Retighten the screw, ensuring it is between the
spokes of the washer. Screw will not be tight, just
insert until it is flush with the hinge.
Screw (where applicable)
To adjust the flipper mullion:
1 Loosen the screw located on the flipper mullion
hinge.
Adjusting Flipper Mullion Screw
2
Adjust flipper mullion height.
Forproper
connection with the flipper mullion guide, there
should be a separation about the thickness of a
coin (0.060 inches, or 1.5 mm) between the guide
and flipper mullion.
If after adjusting doors higher the door makes a
popping/clicking sound, remove screw and replace with
the longer one supplied in the handle package.
Adjusting Flipper Mullion Height
3 Retighten screw.