Installation; Installation Procedure; Installation Example - Epson EMP EMP-7700 Owner's Manual

This section provides an example of projector installation, and explanations on the projec-
tion distances and projection angles.
I I I I Installation Procedure
Determines the projection angle and projection distance to ensure the most suitable screen
display.
· Do not block the ventilation outlet on the front of the main unit or the air filter (suction inlet) on
the rear of the main unit.
· There are cases where material or paper get sucked onto the Air Filter on the rear panel when the
projector is in use, so attention must be paid to prevent this.
· Do not place the projector in a location where it is subject to the direct air flow from air condi-
tioners or heaters.
· When the projector is to be placed near a wall, ensure that there is at least 20cm of space between
the wall and the projector.
· Do not cover the projector with table cloths or other material.

Installation example

The projector may be installed in locations that conform to the installation conditions and pro-
jection methods.
Viewing projected images from the front
Viewing projected images from the front with a ceiling suspended projector
Use the optional ceiling suspension unit and set the ceiling suspension parameter to [ON]. (see
page 70)

Installation

Caution

Installation Procedure - 23