Remote Control; Light Button - Epson EMP EMP-7700 Owner's Manual

Remote Control

G Front Panel
1 Remote control light-receiving area
Outputs the remote control unit's signals.
2 Indicator
Illuminated when the remote control unit signals are being output.
· The light will not be output if batteries are weak, or the switch is off.
3 [Freeze] button (see page 54)
Temporarily freezes the image. Press this button once more to cancel the freeze mode.
4 [A/V Mute] button (see page 54)
Temporarily erases the images and sound. Projection will be resumed if this button is
pressed once more or the volume is adjusted.
5 [E-Zoom] button (see page 56, 60)
Enlarges and reduces the image. Enlarges the sub-screen when using P in P images. Press
the [Esc] key to cancel this mode.
6 [Effect] button (see page 57)
Executes the allocated effect function. Press the [Esc] key to cancel this mode.
7 [ (Light)] button
The remote control button will be illuminated for approximately ten seconds.
8 [Power] button (see page 41, 44)
Switches the power supply to the projector on and off.
9 [R/C ON OFF] switch (see page 41, 45)
Switches the remote control unit on and off. The remote control unit cannot be used for
operations when this switch is not set at [ON].
10 [Enter] button (see page 35, 64)
· Sets the menu item when pressed, and then moves onto the lower stage. Becomes a cur-
sor key to select the menu items when moved up, down, left or right.
· This function operates as a left-hand click on the mouse when computer images are being
projected. The pointer will move when this button is moved up, down, left or right.
18 - Parts, Names and Operations
1
2
3
Freeze
4
A/V Mute
5
E-Zoom
6
Enter
7
Esc
Power
8
9
R/C ON
OFF
3
10
11