Epson EMP EMP-7700 Owner's Manual page 74

5
Select [Yes] and then press the [
on the remote control).
The enlargement setup screen will be displayed.
6
Select the enlargement rate and then press the [
[Enter] button on the remote control).
The screen to confirm saving will be displayed.
7
Select [Yes] and then press the [
on the remote control).
The image will be saved. Wait until the [saving completed] screen is displayed.
Point
· A certain amount of time is required for the saving process. Do not operate the projector
or connected equipment while saving is in progress. Failure to observe this may result in
defects.
· The image size that can be registered is 400 x 300 dots.
· The display size will be amended depending on the input resolution.
72 - Menu Operations
(Enter)] button on the main unit (the [Enter] button
User's Logo Capture
Do you use this image?
Yes
:Return :Select :Execute
User's Logo Capture
Set the zoom rate.
zoom rate :
100 200
:Return :Select :Execute
(Enter)] button on the main unit (the [Enter] button
User's Logo Capture
Do you save the user's logo?
Yes
If you save it,
the previous user's logo
will be overwritten.
:Return :Select :Execute
No
(Enter)] button on the main unit (the
300
No