Epson EMP EMP-7700 Owner's Manual page 13

G
Never attempt to remove the lamp immediately after the projector has
been used. Wait for the projector to cool down sufficiently by leaving
it for at least sixty minutes after the power supply has been switched
off.
Failure to observe this may result in burns or other injuries.
G
Misuse of the batteries may result in damage to the batteries and
subsequent leakages, leading to the outbreak of fire, injury and prod-
uct corrosion. Observe the following precautions to ensure safety.
· Never use combinations of different batteries, or old batteries together
with new batteries.
· Never use batteries that are not specified in the instruction manual.
· If liquid should leak from the battery, wipe up the leakage with a cloth and
then replace the battery accordingly.
· Replace the batteries immediately when the time for replacement
arrives.
· Remove the batteries when the projector is not to be used for a long
period of time.
· Never apply heat to the batteries, or place them in naked flames or water.
· Ensure that the batteries are inserted in accordance with the correct
polarity (+ and -).
· If any liquid that has leaked from a battery gets onto the hands, wash it
off immediately with water.
Batteries must be disposed of in accordance with the regulations in effect
in each relevant area.
G
Ensure that the electric plug and connectors have been discon-
nected from their sockets when performing maintenance tasks.
Failure to observe this may result in electric shocks.
Caution
Confirmation
Safety Precautions - 11