Tracking Adjustments (When Projecting Computer Images); Synchronization Adjustments (When Projecting Computer Images); Calling Out Adjustment Values (When Projecting Computer Images); Picture Quality Adjustment - Epson EMP EMP-7700 Owner's Manual

Tracking adjustments (when projecting computer images)

Adjusted when vertical stripes are apparent on the computer image.
1
Press the [Tracking +, -] button on the projector.
Synchronization adjustments (when projecting computer
images)
Adjusted when flashing, blurring and vertical noise are apparent on the computer image.
1
Press the [Sync +, -] button on the projector.
Calling out adjustment values
(when projecting computer images)
It is possible to record preset adjustment values and call them out when required.
1
Press the [Preset] button on the remote control.
The pre-registered numbers between preset #1 and preset #5 will change in sequence
whenever this button is pressed.
Point
· There are cases when these adjustments must be made again if the values output from
the computer (resolution, display color) are amended after flashing and blurring have
been adjusted.
· There are cases where flashing and blurring is caused by adjusting the brightness and
contrast*.
· Images will be projected more vividly if synchronization adjustments are made after the
tracking adjustments.
· Auto adjustments, tracking adjustments and synchronization adjustments are not possible
if no image signals are being input by the computer, such as when projecting video
images.
· The preset values must be registered beforehand. (see page 66)

50 - Picture Quality Adjustment

Power
Computer Video Menu Sync Esc Help
A/V mute
Tracking Tracking
Resize Keystone
Volume
Shift Sync
Power Computer Video Menu Sync Esc
A/V mute
Tracking
Resize Keystone
Shift Volume Sync
Esc
Menu Help
Comp1
Comp2/YCbCr
Video
Auto Resize
P in P Preset
Preset
- Volume +
Help
Tracking