Using Quick Wireless Connection; Configuring Basic Settings - Epson BrightLink 455Wi User Manual

Using Quick Wireless Connection

Using the optional Quick Wireless Connection USB key, you can
connect the projector to a Windows computer wirelessly without any
configuration.
First, make sure you have installed the wireless module as described on
page 83 and turned on the projector.
1. Connect the USB key to the projector's
port.
2. When you see a projected message that the network information
update is complete, remove the USB key.
3. Connect the USB key to a USB port on your computer or
notebook.
In Windows 7 or Windows Vista, if you see the AutoPlay
window, select
Run LaunchU3.exe
Account Control screen, click
4. Follow the instructions on the screen to install the Quick Wireless
Connection driver.
If you see a Windows Firewall message, click
firewall.
After a few moments, your computer image will be displayed
through the projector. If not, try restarting your computer.
5. When you're done with your presentation, remove the USB key.
You may need to restart your computer to reactivate your wireless
interface.

Configuring Basic Settings

You can give your projector a unique name, enable a projector
keyword, or create a password for controlling the projector over the
Web.
1. Press the button, then choose
Menu
2. Choose
Network Configuration
(flat)
TypeA
. When you see the User
.
Allow
to disable the
Yes
and press
Network
and press .
Enter
note
Do not attempt to write to
the USB key or use it as a
flash memory drive.
USB
note
The Quick Wireless
Connection utility will
disable any other wireless
sessions and adapter
programs. Make sure you
leave the USB key in your
computer for your entire
Quick Wireless Connection
session.
.
Enter
Using the Projector on a Network
85