Using The Direct Power On Function - Epson BrightLink 455Wi User Manual

2. Press the Ppower button on the projector or on the remote
control.
The projector beeps once and the Ppower light flashes green as
the projector warms up, then an image begins to appear. When
the Ppower light stops flashing and remains green, the projector
is ready for use.
3. If you are prompted to enter a password, see page 75.

Using the Direct Power On Function

The Direct Power On function enables faster setup. The projector
starts up automatically when you plug it in or turn it on with a wall
switch. You don't have to press the Ppower button.
Follow these steps to enable Direct Power On:
1. Press the button on the remote control or projector, then
Menu
select the
Extended
2. Choose
Operation
3. Choose
Direct Power On
4. Highlight and press
On
5. Press to exit. The setting will take effect the next time you
Menu
plug the projector into a power outlet or turn it on with a wall
switch.
menu and press
Enter
and press .
Enter
and press
Enter
.
Enter
.
.
Displaying and Adjusting the Image
warning
Never look into the lens
when the lamp is on. This
can damage your eyes, and is
especially dangerous for
children.
note
If a power outage occurs
when Direct Power On is
enabled and the projector is
plugged in, the projector will
restart when the power is
restored.
41