Solving Problems With The Image Or Sound - Epson BrightLink 455Wi User Manual

Solving Problems
120
If nothing is projected after the drivers are installed, do one of the
■
following:
Windows: Select
EPSON Projector
.
Display Vx.x
Mac OS: Click the
see it, open the
USB Display
and run
USB Display
Make sure
■
USB Type B
(see page 72).
Display
In Windows, if the mouse pointer flickers, select
■
>
Programs EPSON Projector
EPSON USB Display Vx.x
checkbox.
window
With Windows DirectX, turn off DirectX functions.
■
■ If you are using Windows Media Center, make sure you use
window display mode, rather than full-screen display mode.
If the image is choppy, make sure you are using a USB 2.0
■
interface on your computer.
Solving Problems With the Image
or Sound
No image appears on the screen.
Check that the Ppower light is green and not flashing. Also press
■
the button on the remote control to make sure the
A/V Mute
picture has not been turned off temporarily.
■ The projector may be in standby or sleep mode. If the Ppower
light is orange, press the Ppower button to turn the projector on.
■ If the power was switched off and then on again, the projector
may be cooling down. Wait until the Ppower light stops flashing
and remains orange; then press the Ppower button again.
or >
Start All Programs
>
EPSON USB Display
icon in the Dock. If you don't
USB Display
folder in the Applications folder
.
in the Extended menu is set to
>
EPSON USB Display
., then clear the
or >
Programs
>
EPSON USB
USB
or
All Programs
>
Transfer layered