Placing Speakers - Yamaha DSP-Z11 Owner's Manual

Av amplifier
Hide thumbs Also See for DSP-Z11:
Table of Contents

Advertisement

Placing speakers

The speaker layout below shows the speaker setting we recommend. You can use it to enjoy the CINEMA DSP and multi-channel audio
sources.
■ 11.2/11.1 -channel speaker layout
11.2/11.1-channel speaker layout is highly recommended for playback the sound of high definition audio formats (Dolby TrueHD, DTS-HD
Master Audio, etc.) as well as the conventional audio sources with sound field programs. See page 23 for connection information.
FPR
FPL
FR
FL
C
LSW
SL
Front left and right speakers
The front speakers are used for the main source sound plus effect sounds. Place these speakers at an equal distance from the ideal listening position.
The distance of each speaker from each side of the video monitor should be the same.
Center speaker
The center speaker is for the center channel sounds (dialog, vocals, etc.). If for some reason it is not practical to use a center speaker, you can
do without it. Best results, however, are obtained with the full system.
Surround left and right speakers
The surround speakers are used for effect and surround sounds.
Surround back left and right speakers
The surround back speakers supplement the surround speakers and provide more realistic front-to-back transitions.
Front and rear presence left and right speakers
See page 26 for details.
Left and right subwoofers
See page 25 for details.
Using di-pole speakers
It is recommended that you use di-pole speakers for surround left
and right channels for the accurate playback with the THX
surround modes. When you use di-pole speakers, place the
surround and surround back speakers as below. Set the distance
between surround back speakers rather narrow compared with the
conventional speaker layout.
RSW
SR
RPR
SBR
RPL
SBL
FPL
FPR
C
FL
FR
30˚
SL
SR
60˚
SL
SR
80˚
SBL
SBR
RPL
RPR
30 cm (12 in) or more
Speaker indications
FL/FR: Front left/right
C: Center
SL/SR: Surround left/right
SBL/SBR: Surround back left/right
FPL/FPR: Front presence left/right
RPL/RPR: Rear presence left/right
LSW/RSW: Left/right subwoofer
FL
FR
C
SL
SR
SBL
SBR
: Di-pole speaker
: Direction of the di-pole speaker phase
Connections
21
En

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents