Auto Setup - Yamaha DSP-Z11 Owner's Manual

Troubleshooting
Status message
Unable to play
License Unavailable
List updated
Bookmark ON
(Bookmark OFF)
Empty Memory!
Not found!
USB Overloaded
■ iPod
Note
In case of a transmission error without a status message appearing in the front panel and in the video monitor, check the connection to your iPod (see page 36).
Status message
Loading...
Connect error
Unknown iPod
iPod connected
Disconnected
Unable to play

■ Auto Setup

Before Auto Setup
Error message
Connect MIC!
Unplug Phones!
No Setup Menu!
Memory Guard!
126
En
Cause
This unit cannot play back the songs currently
stored on your PC.
The network may be overloaded with heavy traffic,
and playback is interrupted.
This unit cannot find the license key of the file.
The list of the contents stored on your PC server or
MCX-2000 has been updated.
The desired Internet Radio station has been added
(removed) to the "Bookmarks" list.
No items are assigned to the selected numeric
button.
This unit cannot find the assigned item for the
selected numeric button.
Over current passes through the connected USB
device.
Cause
This unit is in the middle of recognizing the
connection with your iPod.
This unit is in the middle of acquiring song lists
from your iPod.
There is a problem with the signal path from your
iPod to this unit.
The iPod being used is not supported by this unit.
Your iPod is properly stationed in a Yamaha iPod
universal dock (such as the YDS-10, sold
separately) connected to the DOCK terminal of
this unit, and the connection between your iPod
and this unit is complete.
Your iPod was removed from a Yamaha iPod
universal dock (such as YDS-10 sold separately)
connected to the DOCK terminal of this unit.
This unit cannot play back the songs currently
stored on your iPod.
Cause
Optimizer microphone is not connected.
Headphones are connected.
No check items are selected as the measurement
items.
"Memory Guard" is set to "On".
Remedy
Make sure Windows Media Player 11 or Windows Media
Connect 2.0 is installed on your PC.
Check that the songs currently stored on your PC are playable
(MP3, WMA, MPEG-4 AAC, and WAV).
Store some other playable music files (MP3, WMA, MPEG-4
AAC, and WAV) on your PC.
Try preparing a network exclusively for use with this unit to
separate it from general network traffic.
Acquire the license key of the file. For details, consult with the
supplier of the file.
Assign the desired item to the numeric button.
Connect the USB device that stores the preset item.
Turn on the PC or MCX-2000.
Try again when the selected Internet Radio is providing the
service.
Preset the desired item to the numeric button (1-8) again.
Turn off this unit and then disconnect the USB device. If the
message appears when you connect the USB device again, this
unit may not compatible with the USB device.
Remedy
Turn off this unit and reconnect the Yamaha iPod universal dock
to the DOCK terminal on this unit.
Try resetting your iPod.
Only iPod (Click and Wheel), iPod nano, and iPod mini are
supported.
Station your iPod back in a Yamaha iPod universal dock (such
as YDS-10 sold separately) connected to the DOCK terminal on
this unit.
Check that the songs currently stored on your iPod are playable.
Store some other playable music files on your iPod.
Remedy
Connect the supplied optimizer microphone to the
OPTIMIZER MIC jack on the front panel.
Unplug the headphones.
Select the desired check item.
Set "Memory Guard" to "Off".
See page
—
—
—
—
—
70
—
68
69
70
—
See page
36
—
—
36
—
—
See page
43
—
44
94