Default Macro Functions; Programming Macro Operations (Macro) - Yamaha DSP-Z11 Owner's Manual

Remote control features

■ Default macro functions

Pressing To automatically transmit these signals
macro
STANDBY
POWER
MULTI
V-AUX
PHONO
MD
TAPE
BD
HD DVD
DVD
CD
CD-R
CBL
SAT
DTV
DVR
VCR
TUNER
DOCK
NET
USB
*1 Set the appropriate remote control code for TV in advance (see
page 104).
*2 This unit plays the last received station or selected contents before the
unit was set in the standby mode.

■ Programming macro operations (MACRO)

You can program your own macro and use the macro programming
feature to transmit several remote control commands in sequence at
the press of a button. Be sure to set up remote control codes or
perform learning operations before programming the macro.
Notes
• The default macro is not cleared when a new macro is programmed for a button. The
default macro can be used again when the programmed macro is cleared.
• It is not possible to add a new signal (macro step) to the default macro. Programming
a macro changes all macro contents.
• We do not recommend that you program continuous operations (for example, volume
control) in a macro.
1
Press GSETUP on the remote control using a
ballpoint pen or similar object.
"SETUP" appears in the display window (4).
108
En
First Second
STANDBY —
(*1)
POWER
TV
MULTI
V-AUX
PHONO
MD
TAPE
BD
HD DVD
DVD
CD
POWER
CD-R
CBL
SAT
DTV
DVR
VCR
TUNER
DOCK
(*2)
NET
USB
2
Press 9k / n repeatedly to select "MACRO" and then
press 9ENTER.
The remote control enters the macro-programming mode.
"MACRO" and "M:the three-letter name of the selected control
area" (for example, "M:DVD") appears in the display window
(4) alternately.
MACRO
3
Press the desired macro button you want to assign
the macro program to and then press 9ENTER.
"M:the three-letter name of the selected macro button" (for
example, "M:DVD") and the name of the currently selected
control area appears in the display window (4) alternately.
When you press DSTANDBY or EPOWER, "M:STB" or
"M:PWR" and the name of the currently selected control area
appears in the display window (4) alternately.
4
Press the buttons for the functions you want to
include in the macro operation in sequence.
Example
Set the input source to DVD
Turn on the video monitor
Step 1 ("MCR1"): Press DVD.
Step 2 ("MCR2"): Press AV POWER.
Step 3 ("MCR3"): Press TV POWER.
POWER
TV
MULTI
BD
HD DVD
CBL
SAT
TUNER
MCR 1
M:DVD
Flashes alternately so you can set the
next step
DVD
Notes
To change the selected input area, press 5 SELECT l
•
input selector but
tons or
5 SELECT l
/ h
only changes the selected input area.
• The position of the operation mode selector (AMP/TV/SOURCE) affects the
assigned function. When the operation mode selector is set to FAMP or
FTV, the input source selectors do not function.
5
Press HMACRO to confirm the program.
You can set up to 10 steps (10 functions). After you have set 10
steps, "FULL" appears and the remote control automatically
exits from the macro programming mode.
M:DVD
→
Turn on the DVD player
POWER STANDBY POWER
AV
3 2
MD
V-AUX PHONO
TAPE
DVD CD CD-R
1
DTV DVR VCR
NET
DOCK
USB
Indicates the number of macro
steps entered
(Selected macro button)
(Selected control area)
/ h
. Pressing the
a macro step, whereas
will program
→