Epson PowerLite 821p User Manual page 82

Solving Problems
82
The attached computer may be in sleep mode or displaying a
black screen saver. Try pressing a key on the computer.
If you're projecting from a video source, press the
your video equipment.
Nothing appears on the external monitor.
Make sure the VGA computer cable is connected to your
computer's video port and the projector's
Computer1/Component Video1
connected the computer cable to the projector's
Computer2/Component Video2
Make sure the cable from your monitor is connected to the
projector's
Monitor Out
You see a blue screen with the message
Make sure the cables are connected correctly, as described in
Chapter 1.
Make sure the power to your computer or video source is
turned on.
If you've connected a computer and one or more video sources,
you may need to press the
projector, or the
Comp 1
on the remote control to select the correct source. Allow a few
seconds for the projector to sync up after pressing the button.
If you've connected a notebook computer, make sure it's set to
display on an external monitor. See page 33.
port. It will not work if you
port.
port.
No Signal
button on the
Source Search
, , , or
Comp 2 S-video
button on
Play
displayed.
button
Video