Epson PowerLite 821p User Manual page 74

Epson multimedia projector user's guide 821p
Hide thumbs Also See for PowerLite 821p:
Table of Contents

Advertisement

note
The lamp(s) in this
product contain mercury.
Please consult your state and
local regulations regarding
disposal or recycling. Do not
put in the trash.
caution
Do not touch the glass
portion of the lamp assembly.
Touching the glass could
result in premature lamp
failure.
note
Be sure to seat the lamp fully
and secure the lamp cover. If
the lamp is not properly
installed or the cover is loose,
the lamp will not turn on.
Maintaining and Transporting the Projector
74
6. Hold the lamp as shown and pull it straight out.
7. Gently insert the new lamp. If it doesn't fit easily, make sure it's
facing the correct way.
8. Once the lamp is fully inserted, tighten its screws.
9. Lower the lamp cover into place. (The opening should be almost
covered, and the top of the cover should be flush with the top of
the projector.) Then slide the cover closed and tighten the screw.
10. Reset the lamp timer as described in the next section.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Emp-821

Table of Contents