Epson PowerLite 821p User Manual page 56

note
If Auto Setup is turned off,
you can still automatically
adjust tracking and sync for
computer images by pressing
the button on the
Auto
remote control or the
Enter
button on the projector's
control panel.
If you have repositioned your
computer image with the
setting or made
Position
changes to the or
Tracking
settings, you can press
Sync
the button on the
Auto
remote control to restore the
default settings.
If you're adjusting tracking
and sync manually, adjust
tracking first for best results.
Fine-tuning the Projector
56
3. Press . Then use the
Enter
arrow buttons) and the
following options:
(computer images)
Auto Setup
Leave this setting
image. Turn it off if you want to adjust tracking and sync
manually.
(computer images)
Tracking
Removes unwanted vertical lines from a computer image by
matching the projector's internal clock to various computer
signals. See page 87 for more information about adjusting the
tracking.
(computer images)
Sync
Corrects fuzziness or screen flicker by synchronizing the
projector with the tracking signal sent from the computer.
See page 87 for more information about adjusting the sync
setting.
Position
Use the pointer button or arrow buttons to move the
image on the screen left, right, up, or down.
Computer 1 Input
Selects the signal from equipment connected to the
Computer1/Component Video1
look wrong, try changing this setting from
following:
Computer 1
or
Component Video 1
Computer 2 Input
Selects the signal from equipment connected to the
Computer2/Component Video2
look wrong, try changing this setting from
following:
Computer 2
or
Component Video 2
pointer button (or up and down
button to select any of the
Enter
to automatically optimize the computer
ON
port. If your image colors
for computer or RGB video sources,
for component video sources.
port. If your image colors
for computer or RGB video sources,
for component video sources.
to one of the
Auto
to one of the
Auto