Replacing The Lamp - Epson PowerLite 821p User Manual
Epson multimedia projector user's guide 821p
Hide thumbs
Also See for PowerLite 821p:
- Product information (15 pages) ,
- Product support bulletin (8 pages) ,
- Specifications (2 pages)
Table of Contents
Advertisement
note
You can check to see how
many hours the lamp has
been used. See page 61.
Turn the projector off when
not in use. Continuous
24-hour-a-day use may
reduce the overall life of this
product.
Maintaining and Transporting the Projector
72
4. If you need to replace the filter, slide it off, as shown.
5. Align the new filter carefully as you slide it into place. It should
click into place.
Replacing the Lamp
The projection lamp typically lasts for about 2000 hours of use
(in high brightness mode) or 3000 hours (in low brightness mode). It
is time to replace the lamp when:
The projected image gets darker or starts to deteriorate.
The
lamp light is flashing orange.
The message
Replace the Lamp
lamp comes on. Replace the lamp as soon as possible. If you
continue to use the lamp after you see this message, there is a
greater possibility of the lamp breaking.
appears on the screen when the
Advertisement
Table of Contents
