Table of Contents
Advertisement
NOTE: Before attempting
to use your saw, familiarize yourself with all of the
operating
features and safety requirements.
Your hypoid
circular saw has a precision-built
electric
motor and it should only
be connected
to a 120-volt, 60-Hz AC ONLY power supply (normal household
current). DO NOT operate on direct current (DC). This large voltage drop will
cause a loss of power and the motor will overheat.
If the saw does not operate
when plugged
into correct
120-volt, 60-Hz AC ONLY outlet, check the power
supply. The saw has a 10-ft, 2-wire power cord (no adapter needed).
This Hypoid
Circular
Saw has the following
features:
*
15 Amp, 4400 RPM (no-load speed) motor provides
power and torque for
fast, sure cuts in wood,
plywood,
hardboard,
and wood-base
materials.
*
Quick depth-of-cut
adjustments
with maximum
depth of cut: 2-3/8-in.
thick
at 90°; 1-13/16-in. thick at 45 °
Easy-to-read
bevel-cut
scale adjusts from 0° to 51° bevel capacity.
Heavy duty, lightweight,
magnesium
upper and lower blade guards for extra
strength and durability.
Extended-length
trigger switch for maximum
control and comfort.
Punched
Aluminum
base provides
stability for maximum
control during
sawing applications.
Rear handle and front assist handle for positive
gripping, control,
balance,
and comfort.
Includes
Freud 24-tooth,
carbide-tipped
steel, blade for fast, smooth
cuts.
Front-mounted
spindle lock for easy blade changes.
Built-in sawdust-ejection
chute helps direct dust and chips away from the operator.
Permanently
lubricated
ball bearings throughout
for smooth
operation
and
long motor life.
Durable,
machined
hypoid gearing for efficient
power transmission.
PRODUCT
SPECIFICATIONS
Input
15 Amps
Rating
120V, 60Hz AC
No-load Speed
4400RPM
Blade Diameter
7-1/4 in. (184mm)
Cutting
Depth at 90 °
2-3/8 in. (59.5mm)
Cutting
Depth at 45 °
1-13/16 in. (42.5mm)
Maximum
Bevel Angle
51°
28195
Manual_Revised_07-0623
Page i5
Advertisement
Table of Contents
