Table of Contents
Advertisement
5. Loosen the two screws securing the lamp.
6. Grasp the lamp as shown and pull it straight out.
7. Gently insert the new lamp and tighten its screws.
Caution: Don't touch the glass portion of the lamp assembly. Touching the glass could
result in premature lamp failure.
8. Replace the cover and tighten its screws. (The projector won't work if the lamp cover is
open or loose.)
9. Reset the lamp usage timer, as described in the next section.
Resetting the Lamp Usage Timer
After replacing the lamp, follow these steps to reset the lamp usage timer:
1. Press the
button on the projector or remote control.
Menu
2. Use the menu navigation buttons to open the
.
Reset
3. When you see a confirmation prompt, highlight
4. When you're finished, press the
The lamp usage timer doesn't register until you've used the lamp for at least 10 hours.
menu, then select
Reset
Yes
button to exit.
Menu
Lamp-Hours
and press the
button.
53
Advertisement
Table of Contents
