Resetting The Lamp Usage Timer - Epson PowerLite Pro Cinema 6020UB User Manual

9. Replace the lamp cover. (The projector won't work if the lamp cover is open or loose.)
10. Tighten the lamp cover screw.
11. Reset the lamp usage timer, as described on page 65.

Resetting the Lamp Usage Timer

After replacing the lamp, plug the projector back in, turn on the power switch on the back of
the projector, and press the Ppower button on the projector or the
control. Then follow these steps to reset the lamp usage timer:
1. Press the button on the projector or remote control.
Menu
2. Use the menu navigation buttons to open the
.
Hours
3. When you see a confirmation prompt, highlight
4. When you're finished, press the
The lamp usage timer shows 0H until you've used the lamp for at least 10 hours.
menu, then select
Reset
Yes
button to exit.
Menu
button on the remote
On
Reset Lamp
and press the button.
Enter
65
Maintenance