Setting Up The Projector; Choosing A Location - Epson 200 User Manual

Epson powerlite cinema 200 home theater projector user's guide

Hide thumbs Also See for 200:

Table of Contents

Setting Up the Projector

Follow the instructions in this section to choose a location for the projector, connect the

cables, and display and adjust the image.

You can install the projector for various viewing setups, as shown below.

If you install the projector in a rear or overhead position, you'll need to flip and/or mirror the

image by selecting the correct Projection option (see page 18). For overhead projection, you'll

also need to install the optional ceiling mount bracket (see page 10 for ordering information).

For all setups, it's best to place the projector at

a height where its lens is between the top and

bottom of the screen. That way, you can keep

the projector level and use the vertical lens

shift knob to position the image. This

produces the best-looking picture.

If you place the projector above or below

screen level, you'll have to tilt it up or down to

aim the image at the screen; this distorts the shape of the image, but you can correct its shape

using the projector's Keystone function (see page 19).

Front/Ceiling

Front

Rear/Ceiling

Rear

Table of Contents

Powerlite cinema 200 Emp-tw200