Resetting The Lamp Usage Timer; Checking The Projector Status - Epson PowerLite 5010 User Manual

10. Tighten the lamp cover screw.
11. Reset the lamp usage timer, as described on page 64.

Resetting the Lamp Usage Timer

After replacing the lamp, plug the projector back in, turn on the power switch on the back of
the projector, and press the Ppower button on the projector or the
control. Then follow these steps to reset the lamp usage timer:
1. Press the
Menu
2. Use the menu navigation buttons to open the
.
Hours
3. When you see a confirmation prompt, highlight
4. When you're finished, press the
The lamp usage timer shows 0H until you've used the lamp for at least 10 hours.

Checking the Projector Status

You can use the Info menu to view information about the current display settings and how
long the projection lamp has been in use. To access the Info menu:
1. Press the
Menu
64
Maintenance
button on the projector or remote control.
Menu
button on the projector or remote control.
menu, then select
Reset
and press the
Yes
button to exit.
button on the remote
On
Reset Lamp
button.
Enter