Download Print this page

Resetting The Lamp Usage Timer - Epson PowerLite 8350 Replacement Manual

Replace the air filter and the lamp

Hide thumbs Also See for PowerLite 8350:

Epson PowerLite 8350 / 8700 UB

8. Gently insert the new lamp and tighten its screws.

Caution: Don't touch the glass portion of the lamp assembly. Touching the glass could result

in premature lamp failure.

9. Replace the lamp cover. (The projector won't work if the lamp cover is open or loose.)

10. Reset the lamp usage timer, as described on page 56.

Resetting the Lamp Usage Timer

After replacing the lamp, plug the projector back in, turn on the power switch on the back,

and press the P power button. Then follow these steps to reset the lamp usage timer:

1. Press the

2. Use the menu navigation buttons to open the

Hours

3. When you see a confirmation prompt, highlight

4. When you're finished, press the

The lamp usage timer shows 0H until you've used the lamp for at least 10 hours.

button on the projector or remote control.

INSTALLATION HANDBOOK

Reset

menu, then select

Yes

and press the

button to exit.

Reset Lamp

Enter

button.

Maintenance

Powerlite 8700 ub