Screen Options
Message
Setting ! On-Screen Display ! Message
Turn this setting off if you want to prevent on-screen messages from appearing (such as
the no-signal message, or the identifying text that appears when you switch between
image sources or color modes).
Background Color
Setting ! On-Screen Display ! Background Color
Changes the screen that's used when the projector is not receiving a signal or when you
press the
to display the EPSON logo on a black background.
Logo
Startup Screen
Setting ! On-Screen Display ! Startup Screen
Turn this setting off if you want to prevent the EPSON logo from appearing while the
projector is warming up.
Other Setup Options
Keystone
Setting ! Screen ! Zoom Caption
Adjusts the shape of the image, if the left and right sides are not parallel after tilting the
projector up or down at the screen (see page 19).
Projection
Setting ! Screen ! Projection
Mirrors and/or inverts the image for front, rear, and overhead projection.
36
button to temporarily stop projection. Select
Blank
(instead of
Blue
Black
) or