Integrated Peripherals - Gigabyte GA-MA785GM-UD2H User Manual

Am2+/am2 socket motherboard for amd phenom ii processor/ amd phenom processor/ amd athlon ii processor/ amd athlon processor/ amd sempron processor
Table of Contents

Advertisement

2-6

Integrated Peripherals

OnChip IDE Channel
OnChip SATA Controller
OnChip SATA Type
x OnChip SATA Port4/5 Type
Onboard Audio Function
Onboard 1394 Function
Onboard LAN Function
 SMART LAN
Onboard LAN Boot ROM
OnChip USB Controller
USB EHCI Controller
USB Keyboard Support
USB Mouse Support
Legacy USB storage detect
Onboard Serial Port 1
Onboard Parallel Port
Parallel Port Mode
x ECP Mode Use DMA
higf : Move
Enter: Select
F5: Previous Values
OnChip IDE Channel
Enables or disables the integrated IDE controller. (Default: Enabled)
OnChip SATA Controller
Enables or disables the integrated SATA controller. (Default: Enabled)
OnChip SATA Type (SATA2_0~SATA2_3 connectors)
Configures the operating mode of the integrated SATA2_0~SATA2_3 controller.
Native IDE
RAID
AHCI
OnChip SATA Port4/5 Type (SATA2_4/ESATA connectors)
This option is configurable only when OnChip SATA Type is set to RAID or AHCI. Configures the oper-
ating mode of the integrated SATA2_4/ESATA connectors.
IDE
As SATA Type The mode depends on the OnChip SATA Type settings.
Onboard Audio Function
Enables or disables the onboard audio function. (Default: Enabled)
If you wish to install a 3rd party add-in audio card instead of using the onboard audio, set this item to
Disabled.
Onboard 1394 Function
Enables or disables the onboard IEEE 1394 function. (Default: Enabled)
CMOS Setup Utility-Copyright (C) 1984-2009 Award Software
Integrated Peripherals
+/-/PU/PD: Value
F6: Fail-Safe Defaults
Allows the SATA controller to operate in Native IDE mode. (Default)
Enable Native IDE mode if you wish to install operating systems that support Native
mode.
Enables RAID for the SATA controller.
Configures the SATA controllers to AHCI mode. Advanced Host Controller Interface
(AHCI) is an interface specification that allows the storage driver to enable advanced
Serial ATA features such as Native Command Queuing and hot plug.
Disables RAID for the SATA controller and configures the SATA controller to PATA
mode. (Default)
[Enabled]
[Enabled]
[Native IDE]
IDE
[Enabled]
[Enabled]
[Enabled]
[Press Enter]
[Disabled]
[Enabled]
[Enabled]
[Enabled]
[Disabled]
[Enabled]
[3F8/IRQ4]
[378/IRQ7]
[SPP]
3
F10: Save
- 49 -
Item Help
Menu Level 
ESC: Exit
F1: General Help
F7: Optimized Defaults
BIOS Setup

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ga-ma785gm-us2hGa-ma785gpm-ud2h

Table of Contents