Product Specifications - Gigabyte GA-MA785GM-UD2H User Manual

1-2

Product Specifications

CPU
Hyper Transport Bus 
Chipset  North Bridge: AMD 785G
 South Bridge: AMD SB710
Memory
Onboard Graphics 
Audio  Realtek ALC889A codec
 Support for S/PDIF In/Out

LAN
Expansion Slots 
Storage Interface 
"*" The GA-MA785GPM-UD2H/GA-MA785GM-UD2H adopts All-Solid Capacitor design.
Only for GA-MA785GPM-UD2H.
j
Only for GA-MA785GM-UD2H.
k
Hardware Installation
Support for AM3/AM2+/AM2 processors:

AMD Phenom II processor/ AMD Phenom
™
AMD Athlon II processor/ AMD Athlon
™
AMD Sempron processor
™
(Go to GIGABYTE's website for the latest CPU support list.)
5200/2000 MT/s
4 x 1.8V DDR2 DIMM sockets supporting up to 16 GB of system memory

Dual channel memory architecture

Support for DDR2 1200(O.C.)/1066

(Go to GIGABYTE's website for the latest memory support list.)
Integrated in the North Bridge:
- 1 x D-Sub port
- 1 x DVI-D port
(Note 3) (Note 4)
- 1 x HDMI port
(Note 4)
 High Definition Audio
 2/4/5.1/7.1-channel
Support for Dolby

Support for CD In
RTL8111C chip (10/100/1000 Mbit)

1 x PCI Express x16 slot, running at x16
(The PCI Express x16 slot conforms to PCI Express 2.0 standard.)
1 x PCI Express x1 slot

2 x PCI slots

South Bridge:
- 1 x IDE connector supporting ATA-133/100/66/33 and up to 2 IDE devices
- 5 x SATA 3Gb/s connectors (SATA2_0, SATA2_1, SATA2_2, SATA2_3,
SATA2_4) supporting up to 5 SATA 3Gb/s devices
- 1 x eSATA 3Gb/s port on the back panel supporting up to 1 SATA 3Gb/s
device
- Support for SATA RAID 0, RAID 1, RAID 10, and JBOD
iTE IT8718 chip:

- 1 x floppy disk drive connector supporting up to 1 floppy disk drive
™
(Note 2)
Home Theater jk
®
- 10 -
processor/
™
processor/
/800 MHz memory modules
(Note 1)