EPSON FX-2180 Service Manual
Figure 4-18. Removing the Case Open Sensor Assembly
4.2.11 Removing the Printer Mechanism
Remove the printer cover, front and rear edge guide assemblies, front
1.
cover, paper eject assembly, and rear tractor unit. (See section 4.2.1.)
Remove the panel board assembly. (See section 4.2.2.)
2.
Remove the upper housing assembly. (See section 4.2.7.)
3.
Remove the three CBS screws (3
4.
to the printer mechanism and remove the upper shield plate. Then
remove the upper I/F grounding plate from the main board assembly.
upper shield
plate
CBS screws
(3 × 4)
Figure 4-19. Removing the Upper Shield Plate and Upper I/F
Grounding Plate
Chapter 4 Disassembly and Assembly
4) securing the upper shield plate
upper I/F
grounding plate
4-13