EPSON FX-2180 Service Manual
1.1.13 Safety Approvals
120 V model
Safety standards:
UL1950
CSA C22.2 No. 950
EMI:
FCC part 15 subpart B class B
CSA C108.8 class B
220 to 240 V model
Safety standards:
EN 60950 (TÜV, NEMKO)
EMI:
EN 55022 (CISPR pub. 22) class B
AS/NZS 3548 class B
UPS model
Safety standards:
UL1950
CSA C22.2 No. 950
EN 60950 (TÜV, NEMKO)
EMI:
FCC part 15 subpart B class B
CSA C108.8 class B
EN 55022 (CISPR pub. 22) class B
AS/NZS 3548 class B
1.1.14 CE Marking
220 to 240 V and UPS models
Low Voltage Directive 73/23/EEC:
EMC Directive 89/336/EEC:
1.1.15 Acoustic Noise
Level:
Approx. 55 dB(A), according to ISO 7779
pattern
EN60950
EN55022 class B
EN61000-3-2
EN61000-3-3
EN50082-1
IEC801-2
IEC801-3
IEC801-4
1.1.16 Ribbon Cartridge
Type:
Fabric
Color:
Black
Ribbon life:
Approx. 12 million characters
(draft, 10 cpi, 14 dots/character)
1.2 Operation
This section provides detailed information about the control panel buttons
and LEDs, and explains the printer's beep patterns.
1.2.1 Control Panel
The control panel contains seven non-locking pushbuttons and nine LEDs,
as shown below.
Figure 1-7. Control Panel
1.2.1.1 Buttons
WARNING
The power switch is wired in the secondary
circuitry of the power supply board. Therefore, the
power supply's primary circuitry remains live
even after the printer is turned off.
Chapter 1 Product Description
1-10