Epson TM-FX2180 Service Manual page 16

EPSON FX-2180 Service Manual
‰ Postcards
Table 1-11. Specifications for Postcards
Front Entry
Minimum
Width
(inches) 3.9
(mm) 100
Length
(inches) 5.83
(mm) 148
Thickness
(inches)
(mm)
Weight
(lb)
(g/m2)
Note:
‰ Before printing on postcards, set the paper thickness lever to position 3
or higher and turn on the card mode by pressing the Tear Off/Bin
button until both Tear Off/Bin lights are on. After you finish printing on
envelopes, press the Tear Off/Bin button once to exit the card mode.
‰ Use postcards only under normal temperature and humidity conditions.
Rear Entry
Maximum Minimum Maximum
5.83 3.9
148 100
5.83 3.9
148 100
0.0087
0.22
51
192
‰ Continuous paper
Table 1-12. Specifications for Continuous Paper
Width
(inches)
5.83
(mm)
148
Length
(inches)
5.83
(mm)
148
Copies*
Total thickness
(inches)
(mm)
Weight
(ordinary page)
(lb)
2
(g/m )
Weight (one
sheet of a
multi-part form)
(lb)
2
(g/m )
Quality
Binding
* To print 1 original + 6 copies, you must use the pull tractor along with
the front or rear tractor.
Chapter 1 Product Description
Front Entry Rear Entry
Min. Max. Min.
4 16 4
101.6 406.4 101.6
4 22 4
101.6 558.8 101.6
1 original + 5 1 original + 5
copies copies
0.0025 0.018 0.0025
0.065 0.046 0.065
12 22 12
52 82 52
12 15 12
40 58 40
Plain or recycled paper, carbonless multi-part forms
Dots of glue or paper staples on both sides (front,
bottom, or rear entry) or dots of glue on only one side
(rear entry)
Bottom Entry
Max. Min. Max.
16 4 16
406.4 101.6 406.4
22 4 22
558.8 101.6 558.8
1 original + 5
copies
0.018 0.0025 0.018
0.046 0.065 0.046
22 12 22
82 52 82
15 12 15
58 40 58
1-7