Chery Automobile User Manual page 92

cool dehumidified air will flow through
the outlets selected with the mode
control switch. An LED in the switch il-
luminates when the air conditioner
control switch is activated.
Blower Control Knob / Recirculation
Control Switch
Use this control to
regulate the amount
of air forced through
the ventilation sys-
tem in any mode.
The blower speed
increases
blower control knob is moved to the
right from the OFF position. There are
eight blower speeds. Press the recir-
culation control switch to recirculate
the air inside the vehicle. Use the re-
circulation mode to rapidly cool the
inside of the vehicle. The recirculation
mode can also be used to temporarily
block outside odors, smoke, dust, or
when high humidity is present. Acti-
vating recirculation will cause the LED
in the control button to illuminate.
Mode Control Switch (Air Direction)
Panel
Airflow is directed through the
as the
outlets in the instrument panel.
These outlets can be adjusted to
direct airflow.
Bi-Level
Airflow is directed through the
instrument panel and floor out-
lets.
Chery Automobile Co., Ltd.
YOUR INSTRUMENT PANEL – 91
Floor
frost and side window defog outlets.
Use this control to
choose from several
Mix
patterns of air distri-
bution.
works best in cold or snowy conditions
that require extra heat to the wind-
shield. This setting is good for main-
taining comfort while reducing mois-
ture on the windshield.
Defrost
this mode with maximum blower and
temperature settings for best wind-
shield and side window defrosting.
Airflow is directed through the
floor outlets with a
amount flowing through the de-
Airflow is directed through the
floor, defrost, and side window
defog outlets. This
Airflow is directed through the
outlets for the windshield and
side window defrosters. Use
small
setting