Chery Automobile User Manual page 87

86 – YOUR INSTRUMENT PANEL
NOTE: Always set the radio volume at
a level that still allows you to hear au-
dible traffic warnings (horns, sirens,
etc.).
Audio Setting
Press SEL button to enter the audio
setting mode. Turn the power/volume
knob to select the desired audio set-
ting option.
• BASS – To increase or decrease bass
• TREBLE – To increase or decrease
treble
• BAL – To move the sound to the right
or left speakers, or balance the sound
between all the speakers
• FADER – To move the sound to the
front or rear speakers, or balance the
sound between all the speakers
• LOUD (off, low, mid, high)
• Sound Style – Preset settings for JAZZ,
VOCAL, POP, CLASSIC, or ROCK
After five seconds, the display returns
to the last mode of operation.
NOTE: You can only adjust the BAL ,
FADER and LOUD audio mode if not
in the BAL - TRE mode.
Waveband
Press the FM/AM button to select the
desired band:FM1 → FM2 → FM →
AM1 → AM
Frequency Scan (SCN)
Press SCN button to activate/deacti-
vate Frequency Scan. Frequency scan
allows you to listen to each station
found on the current band for approxi-
mately 10 seconds. In the meantime,
you can store a selected station in 10
seconds.
Auto Search
• Press the forward button to tune to
a station of a higher frequency or
press the rewind button to tune to a
lower frequency station.
• To search for another station, press
the forward or rewind button again.
Chery Automobile Co., Ltd.
Frequency Sensitive
(Only in FM band)
Switch between local/distance tuning
mode.
• Press SET button for more than 2 sec-
onds to enter the SET UP menu.
• Press Next/Previous Track button to
select the SRCH option.
• Press SET button to set LO/DX.
• Press SET button for more than 2 sec-
onds to exit the SET UP menu.
Manual Tuning
To switch to manual tuning mode, per-
form the following procedure:
• Press SET button for more than 2 sec-
onds to enter the SET UP menu.
• Press Next/Previous Track button to
select the TUN option that you want
to change.
• Press SET button for more than 2 sec-
onds to enter the SET UP menu.