Fuse Replacement - Chery Automobile User Manual

100 – IN CASE OF AN EMERGENCY
• If coolant or steam is boiling out of
the radiator or reservoir, stop the en-
gine. Wait until the steam subsides
before opening the hood. If there is
no coolant boiling over or steam,
leave the engine running and make
sure the electric cooling fan is oper-
ating. If it is not, turn the engine off
and let it cool.
CAUTION!
To help avoid personal injury, keep the
hood closed until there is no steam es-
caping the cooling system. Escaping
steam or coolant is a sign of very high
pressure.
• Look for obvious coolant leaks from
the radiator, hoses, and under the ve-
hicle. However, note that water drain-
ing from the air conditioning is nor-
mal if it has been used.
CAUTION!
When the engine is running, keep
hands and clothing away from the mov-
ing fan and engine drive belts.
• If engine coolant is leaking, stop the
engine immediately. Call an autho-
rized dealer for assistance.
• If there are no obvious leaks, check
the coolant reservoir. If it is dry, add
coolant as needed. See Adding Cool-
ant in the Proper Maintenance Of
Your Vehicle .
CAUTION!
Do not attempt to remove the radia-
tor cap when the engine and radiator
are hot. Serious injury could result from
scalding hot fluid and steam blown out
under pressure.
• After the engine coolant temperature
has cooled to normal, double check
the coolant level in the reservoir. If
Chery Automobile Co., Ltd.
necessary, fill the reservoir to half full
again. Serious coolant loss indicates
a leak in the system. You should have
the cooling system checked as soon
as possible at an authorized dealer.
NOTE: If the engine continues to over-
heat or frequently overheats, have the
cooling system inspected by an autho-
rized Chery dealer as soon as possible.

Fuse Replacement

Fuses are used to protect electrical
circuitry and components from a pos-
sible electrical overload. If a fuse fails
on your vehicle, see the fuse applica-
tion chart to replace the fuse with the
proper amperage.
WARNING!
Turn the ignition switch OFF before re-
placing any fuse.