Table of Contents
Advertisement
Quick Links
FREESTANDING ELECTRIC RANGE WITH DOUBLE OVENS
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING."
These words mean:
DANGER
WARNING
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
IMPORTANT:
Save for local electrical inspector's use.
W10160642A
INSTALLATION INSTRUCTIONS
Table of Contents
RANGE SAFETY............................................................................. 1
INSTALLATION REQUIREMENTS................................................ 2
Tools and Parts............................................................................ 2
Location Requirements ............................................................... 2
Electrical Requirements............................................................... 4
INSTALLATION INSTRUCTIONS.................................................. 5
Unpack Range ............................................................................. 5
Adjust Leveling Legs.................................................................... 5
Install Anti-Tip Bracket ................................................................ 5
Electrical Connection................................................................... 6
Verify Anti-Tip Bracket Location................................................ 11
Level Range ............................................................................... 11
Complete Installation................................................................. 11
Moving the Range ..................................................................... 12
RANGE SAFETY
Your safety and the safety of others are very important.
You can be killed or seriously injured if you don't immediately
follow instructions.
You can be killed or seriously injured if you don't follow
instructions.
Advertisement
Table of Contents
Related Manuals for Jenn-Air JER8895BAS
Summary of Contents for Jenn-Air JER8895BAS
-
Page 1: Table Of Contents
INSTALLATION INSTRUCTIONS FREESTANDING ELECTRIC RANGE WITH DOUBLE OVENS Table of Contents RANGE SAFETY................1 INSTALLATION REQUIREMENTS..........2 Tools and Parts................2 Location Requirements ............... 2 Electrical Requirements............... 4 INSTALLATION INSTRUCTIONS..........5 Unpack Range ................5 Adjust Leveling Legs..............5 Install Anti-Tip Bracket ..............5 Electrical Connection.............. -
Page 2: Installation Requirements
WARNING Tip Over Hazard A child or adult can tip the range and be killed. Connect anti-tip bracket to rear range foot. Reconnect the anti-tip bracket, if the range is moved. Failure to follow these instructions can result in death or serious burns to children and adults. INSTALLATION REQUIREMENTS Tools and Parts Location Requirements... - Page 3 Product Dimensions Cabinet Dimensions Cabinet opening dimensions shown are for 25" (64 cm) countertop depth, 24" (61 cm) base cabinet depth and 36" (91.4 cm) countertop height. If installing a range hood or microwave hood combination above the range, follow the range hood or microwave hood combination installation instructions for dimensional clearances above the cooktop surface.
-
Page 4: Electrical Requirements
Electrical Requirements If codes permit and a separate ground wire is used, it is If connecting to a 4-wire system: recommended that a qualified electrical installer determine that This range is manufactured with the ground connected to the the ground path and wire gauge are in accordance with local cabinet. -
Page 5: Installation Instructions
INSTALLATION INSTRUCTIONS NOTE: If height adjustment is made when range is standing, Unpack Range tilt the range back to adjust the front legs, then tilt forward to adjust the rear legs. 3. When the range is at the correct height, check that there is WARNING adequate clearance under the range for the anti-tip bracket. -
Page 6: Electrical Connection
4. Drill two " (3 mm) holes that correspond to the bracket Wall Mounting holes of the determined mounting method. See below. Floor Mounting A. #12 x 1 " screws B. Anti-tip bracket 5. Using the Phillips screwdriver, mount anti-tip bracket to the wall or floor with the two #12 x 1 "... - Page 7 4. Add strain relief. Replace cord/conduit plate and insert screws. Style 1: Power supply cord strain relief Assemble a UL listed strain relief in the opening. Assemble a UL listed conduit connector in the opening. A. UL listed strain relief Feed the power supply cord through the strain relief in the cord/conduit plate on bottom of range.
- Page 8 Electrical Connection Options 3. Feed the power supply cord through the strain relief in the cord/conduit plate on bottom of range. Allow enough slack to If your home has: And you will be Go to Section: easily attach the wiring to the terminal block. connecting to: 4-wire receptacle A UL listed,...
- Page 9 3-wire connection: Power Supply Cord Direct Wire Installation: Copper or Aluminum Wire Use this method only if local codes permit connecting chassis This range may be connected directly to the fuse disconnect or ground conductor to neutral wire of power supply cord. circuit breaker box.
- Page 10 3. Pull the conduit through the strain relief on cord/conduit plate 6. Use " nut driver to connect the neutral (white) wire to the on bottom of range. Allow enough slack to easily attach center terminal block post with one of the 10–32 hex nuts. wiring to the terminal block.
-
Page 11: Verify Anti-Tip Bracket Location
2. Attach terminal lugs to line 1 (black), bare (green) ground, and Slide range back so rear range foot is engaged with anti-tip bracket. line 2 (red) wires. Loosen (do not remove) the set screw on the front of the terminal lug and insert exposed wire end through bottom of terminal lugs. -
Page 12: Moving The Range
Moving the Range For direct-wired ranges: WARNING WARNING Electrical Shock Hazard Tip Over Hazard Disconnect power before servicing. A child or adult can tip the range and be killed. Replace all parts and panels before operating. Connect anti-tip bracket to rear range foot. Failure to do so can result in death or electrical shock.