Advertisement
The TV has four channel
banks, where the administrator
or installer can store groups of TV channels.
PLANNING THE CHANNEL BANKS
GeneraLLy,TV channels are grouped into "program packages"
with terms that are proposed to the end user. The user then
chooses a package. BeLowis an example of how TV channels
may be grouped.
You may plan your packages by using a chart Like the one
after the foLLowing page.
Remember, you can "bLank" a channel for accommodating
audio-onLy, such as an FM radio station
or in-house
communication.
Sometimes, only one or two channel banks may be needed.
You may Leave any unused bank with the channels entered
during Auto Program; or, you may delete the channels.
However, you may want to Leave at Least one channel in any
unused bank. Then, if someone selects an "unused" bank,
that channel wiLLassure them that the TV is functionaL.
*Note: Some channels from factorytestingmay be inthe channel
banks ifyou have not yet run Auto Program.
Channe[ Bank
Program package
1
Basic cable channels
2
Extended cable channels
3
Extended with premium channels
4
Other cable service options
(Grouping is provided as an example only.)
[_
The BLNK (blank)
channel function
is "global"--
the
same channel number is blanked in all channel banks
i, 2, 3, and 4.
ADDING/DELETING
CHANNELS
A previously p reparedprogramming chartishelpfuL.
i. Run Auto Program (inthe Setup menu). ALLchannels
found on your cabLe/antennawiltbe enteredin Channel
Banks i, 2, 3, and 4.
*Note:Be advised that running AutoProgram overwrites
any
custom channel setups; removes Blanked, Deleted.
2. SeLect a channel bank with an instaLLer remote - -press
SOURCE/BANK (and repeat). CHANNEL BANK and BANK
number wilt be displayed.
CHANNEL BANK
BANK 1
J
Channel Bank Number DispLay
3. Use the ADD/DEL/BLNK option (aLso in the Setup menu)
to customizeyour program package.You may delete
channelsor add some that have not been entered. You
can also "BLank" a channel for accommodating
an audio-
only program source or in-house communication.
The
"ADD/DEL/BLNK"
option on page 15 has more details.
*Note: The Blank Channel feature is global. A channel will be
blanked in all channel banks.
4.
Repeat steps
2, and 3 to program
another
channel
bank.
InactiveTV Display (Channel Bank 4)
The TV can be setup to be inactive; w hich would require an
attendant
using an instaLLer remote to change to a "biLLabLe"
active channel bank selection:
Bank 1, 2, or 3.
*Note: For institution control of patient-accessible
programming, channels in Bank 4 need to be removed.
INACTIVE TV
PLEASE...
CALL ATTENDANT
PAGE
37
Advertisement
