What You Should Do First; Connect The Power; Get To Know The On-Screen Menus - Zenith Sentry 2 SY2518 Operating Manual & Warranty

Direct view color tv, stereo audio
Table of Contents

Advertisement

WHAT
YOU SHOULD
DO FIRST
I
(1_
CONNECT
THE POWER
t&-TER you have connected the necessasry cable(s) to the
_1
jacks on the back of the TV, plug your TV's power cord into
an AC outlet. Make sure you do not plug the TV into a
"switched"
outlet (an outlet that is controlled by a switch).
Do not plug TV into switched outlet on a
VCR or cable.-TV decoder
(_
INSTALL
THE BATTERIES
INTO
THE REMOTE
CONTROL
]ifyou have not already installed the batteries in the remote control, now is a good time to do so. Batleries are provided, but they
must be installed before it can be used.
Unless your equipment responds to the factory preset codes, you will need to reprogram the remote control with the codes of your
mrticular equipment each time you replace batteries. Refer to "Get To Know Your Remote Control" for programming details.
To install the batteries:
1. Open the battery compartment by pressing in on the tab and lift-
ing the cover off.
2. Place the batteries into the compartment matching plus with
plus (+ with +), minus with minus (- with -) with the markings
shown in the battery compartment.
3. Replace the compartment cover.
NOTES:
UI Do not place heavy objects on top of the remote control
keys. Prolonged unintentional operation of the remote
shortens battery life.
121 Remove the batteries if the remote control will not be used
for
a month
or more.
THE REMOTE
CONTROL
MANUFAC-
TURER
IS NOT RESPONSIBLE
FOR DAMAGE CAUSED BY
BATTERY
LEAKAGE.
Push tab in
Multi-Brand
Remote
Control
(Uses 2 size AAA batteries)
@
GET TO KNOW
THE ON-SCREEN
MENUS
Your new TV is a sophisticated entertainment appliance. For
this reason, it is equipped with an automatic demonstration of
the on-screen menus that control the setup and operational fea-
tures of the-TV. By turning on Auto Demo, the on-screen
menus will appear on the TV one-by-one.
To start the Auto
Demo:
1. Press MENU
repeatedly
to view the Setup Menu.
2.
Select Auto Demo.
3.
Use the Left/Right
arrows
to turn Auto Demo ON.
4.
Press QUIT to remove
the menu from view.
NOTE:
The Auto Demo will continue to operate until it has
been turned OFF in the Setup Menu.
_
etup
Menu
Auto Program
Add/Del/Surf
Ch. Labels
Clock
Set
Timer
Setup
Parental
Ctl
Caption/Text
Audio
Mode
Language
___
lAuto Demo
[
On
]
Setup Menu with Auto Demo Highlighted
3_8-o
4_
1

Advertisement

Table of Contents
loading

Table of Contents