Table of Contents
Advertisement
WHAT
YOU SHOULD
DO FIRST
(_
CONNECT
THE POWER
AFTER you have connected tile necessary cable(s) to the
_1
jacks on the back of the TV, plug your TV's power cord into
an AC outlet. Make sure you do not plug the TV into a
"switched"
outlet (an outlet that is controlled by a switch).
Do not plug TV into switched outlet on a
VCR or cable-TV decoder
(_
INSTALL
THE BATTERIES
INTO
THE REMOTE
CONTROL
If you have not already installed the batteries in the remote control, now is a good time to do so. Batteries are provided, but they
must be installed before it can be used.
Unless your equipment responds to the factory preset codes, you will need to reprogram the remote control with tile codes of your
Jarticular equipment each time you replace batteries. Refer to "Get To Know Your Remote Control" for programming details.
To install the batteries:
1.
Open the battery compartment
by pressing in on the tab and lift-
ing the cover off.
2
Place the batteries into the compartment
matching plus with
plus (+ with +), minus with minus (- with -) with the markings
shown in the battery compartment.
3. Replace the compartment
cover.
NOTES:
Q
Do not place heavy objects on top of the remote control
keys. Prolonged unintentional operation of the remote
shortens battery life.
121 Remove the batteries if the remote control will not be used
for a month or more.
TitE REMOTE CONTROL
MANUFAC-
TURER IS NOT RESPONSIBLE
FOR DAMAGE CAUSED BY
BA2"FERY LEAKAGE.
Push tab in
Multi-Brand Remote Control
(Uses 2 size AAA batteries)
(_
GET TO KNOW
THE ON-SCREEN
MENUS
Your new TV is a sophisticated entertainment
appliance. For
this reason, it is equipped with an automatic demonstration of
the on-screen menus that control the setup and operational fea-
tures of the TV. By turning on Auto Demo, the on-screen
menus will appear on the TV one-by-one.
!
To start the Auto Demo:
1. Press MENU repeatedly to view the Setup Menu.
Select Auto Demo.
Use the Left/Right arrows to turn Auto Demo ON.
Press QUIT to remove the menu from view.
NOTE:
C3 The Auto Demo will continue to operate until it has
been turned OFF in the Setup Menu.
Q
o -4
Auto Program
Add/Del/Surf
Ch. Labels
Clock Set
"lqmerSetup
Parental C11
Caption/Text
Language
Auto Demo
I
E
o.
Setup Menu with Auto Demo Highlighted
Advertisement
Table of Contents
