Zenith Sentry 2 SY2518 Operating Manual & Warranty page 2

SAFETY WARNINGS
WARNING
WARNING:
TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT
REMOVE COVER (OR BACK). NO USER SERVICEABLE
PARTS INSIDE. REFER TO QUALIFIED SERVICE
PERSONNEL.
TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE
THIS PRODUCT TO RAIN OR MOISTURE.
The lightning flash with arrowhead symbol, within an equilateral
triangle, is intended to alert the user to the presence of uninsulated
"dangerous voltage" within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to
alert the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the appliance.
SAFETY TIPS
Refer to the "Safety Tips" section of this operating guide
for important safety considerations.
NOTE TO CABLE "13t' SYSTEM
iNSTALLER
This reminder is provided to ,:all the cable TV system
installer's attention to Article 820-40 of the NEC that
provides guidelines for proper gxounding and, in particular,
specifies that the cable ground shall be connecl:ed to the
grounding system of the building, as close to the point of
the cable entry as practical.
POWER-CORD POLARIZATION
q'his product is equipped with a polarized alternating-
current line plug (a plug having one blade wider than the
other.) This plug will fit into the power outlet only one
way. This is a safety feature. If you are unable to insert the
plug fully into the outlet, try reversing the plug. If the plug
should still fail to fit, contact your electrician to replace
your obsolete outlet. Do not defeat the safety purpose of
the polarized plug.
Caution
To prevent electric shock, match wide blade of plug to
wide slot, fully insert.
Attention
Pour 6viter les chocs 61ectfiques., introduire la lame la plus
large de la fiche dans la borne correspondante de la prise et
pousser jusqu'au fond.
TVWRN3
Copyright © Zenith Electronics Corporation 1996
ii