Table of Contents
Advertisement
Getting
Started
I ll!lii41i[!+
I :I_I_
I"_
Il_
General
Precautions
• DO NOT insert any metal
object into the unit.
• DO NOT disassemble
the unit or remove
screws,
covers, or
cabinet.
• DO NOT expose
the unit to rain or moisture.
Locations
,, Install
the unit in a location
that is level and protected
from
moisture.
• The temperature
around
the unit must be between
-5°C
and 35°C
(23°F and 95°F).
• Make sure there is good ventilation
around
the unit. Poor
ventilation
could cause overheating
and damage
the unit.
Handling the unit
• DO NOT touch the power
cord with wet hands.
• DO NOT pull on the power cord to unplug
the cord. When
unplugging
the cord, always
grasp the plug so as not to damage
the cord.
• Keep the power
cord away from the connecting
cords and the
antenna.
The power
cord may cause
noise or screen interference.
It
is recommended
to use a coaxial
cable for antenna
connection,
since it is well-shielded
against
interference.
• When a power
failure occurs,
or when you unplug
the power
cord,
the preset settings
such as preset FM/AM
channels
and sound
adjustments
may be erased in a few days.
Before
using the remote
control,
put two supplied
batteries
first.
• When using the remote
control,
aim the remote
control directly
at
the remote
sensor on the unit.
I On the back of the remote
control, remove
the
battery cover.
2
Insert batteries.
• Make sure to match the polarity:
(+) to (+) and (-) to (-).
/
"D
i
L
¢D
mo
a
mo
o
L
Check to be sure you have all of the following
supplied
accessories.
The number
in the parentheses
indicates
the quantity
of the pieces
supplied.
• Remote
Control
(1)
• Batteries
(2)
• AM Loop Antenna
(1)
• FMAntenna
(1)
If anything
is missing,
contact
your dealer immediately.
3
Replace
the cover.
If the range or effectiveness
of the remote
control decreases,
replace
the batteries.
Use two R6P(SUM-3)/AA(15F)
type dry-cell
batteries.
CAUTION:
Follow these precautions to avoid leaking or cracking cells:
• Place batteries in the remote control so they match the polarity:
(+) to (+) and (-) to (-).
• Use the correct type of batteries. Batteries that look similar may
differ in voltage.
• Always replace both batteries at the same time.
• Do not expose batteries to heat or flame.
3
Hide quick links:
Advertisement
Table of Contents
