Combine Source And Media Type Lists; Removing A Plug-In - Kyocera TASKalfa 552ci User Manual

Selecting Printer Driver Collation
1
2

Combine Source and Media Type Lists

Creating a Combined Source List
1
2

Removing a Plug-in

1
2
3
KX DRIVER
With the check box selected, the printer driver Collate setting is used.
With the check box cleared, the application Collate setting is used.
You can ignore the collation setting in the application and use the printer driver
collation setting.
In Device Settings > Compatibility Settings, select Ignore application
collation.
Click OK in the Compatibility Settings and Properties dialog boxes.
You can restore all the options in Compatibility Settings to the default by
clicking Reset.
You can change the driver's Basic tab so that Media type and Source are
combined into one list, labeled Source. In the combined list, Media types are
listed first, followed by cassettes and MP tray.
You can combine the Source and Media type lists in the Basic tab to make
one Source list.
In Device Settings > Compatibility Settings, select Combine source and
media type lists.
Click OK in the Compatibility Settings and Properties dialog boxes.
You can restore all the options in Compatibility Settings to the default by
clicking Reset.
You can remove an installed plug-in from the driver. If removed, the plug-in
features do not appear in the driver interface.
Note: To remove the Output to PDF module, PDF must not be selected in
the PDL Settings dialog box.
In Device Settings, click Kyocera logo > Plug-in.
Select a plug-in module from the list and click Delete, then Yes.
Click OK in all dialog boxes.
Device Settings
2-18