Component Function; Controls; Elements; Probe - Vulcan-Hart V SERIES Service Manual

V SERIES FOOD HOLDING, TRANSPORT, AND BANQUET CARTS
MODELS: VHP3, VHP7, VHP8, VHP15, VHP20, VBP5I, VBP7I, VBP13I, VBP15I,
VBP77I, VBS7, VBS15, VHDP5, VB90, VB96, VB150, VBP33

CONTROLS

THERMOMETER:
temperature. (Fig. 2)
THERMOSTAT: Turns power on to heating
element. Thermostat setting is from 1 to 10.
The greater the thermostat setting number,
the higher the temperature.
Approximate
Thermostat
Temperature
Setting
1 100⁰F (37⁰C)
2 110⁰F (43⁰C)
3 120⁰F (49⁰C)
4 130⁰F (54⁰C)
5 140⁰F (60⁰C)
6 150⁰F (66⁰C)
7 160⁰F (71⁰C)
8 170⁰F (77⁰C)
9 180⁰F (82⁰C)
10 190⁰F (88⁰C)
POWER INDICATOR LIGHT:
unit is plugged in. As long as the cabinet is
plugged in, the red light will stay on.
HEAT INDICATOR LIGHT:
element is heating. Light will stay on as
long as the heating elements are engaged.
Once the predetermined temperature is
achieved, the heating elements will begin to
cycle. During this period the amber light will
turn on and off.

ELEMENTS

ELEMENTS: Heat
located at the bottom of cabinet.

COMPONENT FUNCTION

Indicates interior
Indicates
Indicates
element/elements
7

PROBE

THERMOSTAT: Controls
temperature of the heating element. Once
the output temperature of the heating
element reaches the set temperature, the
thermostat sensor removes power from the
heating element.
THERMOMETER: Senses the temperature
in the cabinet.
MODELS: VHFA9, VHFA18
CONTROLS
THERMOMETER:
temperature. (Fig. 7)
THERMOSTAT: Turns power on to heating
element. Thermostat setting number, the
higher the temperature.
POWER INDICATOR LIGHT:
unit is plugged in and ON/OFF SWITCH is
in the ON position. The red light will stay on
until the ON/OFF Switch is in the OFF
position.
HEAT INDICATOR LIGHT:
element is heating. Light will stay on as
long as the heating elements are engaged.
Once the predetermined temperature is
achieved, the heating elements will begin to
cycle. During this period, the amber light
will turn on and off.
POWER ON/OFF SWITCH:
electrical power to the cabinet and turns on
the fan. The cabinet will not have power
unless switch is in the ON position.
F-41141 (11-09)
the output
Indicates interior
Indicates
Indicates
Supplies