Important For Your Safety - Vulcan-Hart V SERIES Service Manual

V SERIES FOOD HOLDING, TRANSPORT, AND BANQUET CARTS
THIS MANUAL HAS BEEN PREPARED FOR PERSONNEL QUALIFIED TO INSTALL
ELECTRICAL EQUIPMENT, WHO SHOULD PERFORM THE INITIAL FIELD START-
UP AND ADJUSTMENTS OF THE EQUIPMENT COVERED BY THIS MANUAL.
READ THIS MANUAL THOROUGHLY BEFORE OPERATING, INSTALLING OR
PERFORMING MAINTENANCE ON THE EQUIPMENT.
WARNING
WARNING
WARNING
WARNING
WARNING
WARNING
WARNING

IMPORTANT FOR YOUR SAFETY

Failure to follow instructions in this manual can cause
property damage, injury, or death.
Always Perform the Lockout/Tagout procedure before
removing any sheet metal panels or attempting to service this
equipment. Failure to comply with this procedure can cause
property damage, injury, or death.
Improper installation, adjustment, alteration, service, or
maintenance can cause property damage, injury, or death.
Do NOT operate this equipment without properly placing and
securing all covers and access panels.
In the event of a power failure, do not attempt to operate this
device.
Electrical and grounding connections must comply with the
applicable portions of the National Electric Code and/or all
local electric codes.
Appliances equipped with a flexible electric supply cord, are
provided with a three-prong grounding plug. It is imperative
that this plug be connected into a properly grounded three-
prong receptacle. If the receptacle is not the proper grounding
type, contact an electrician. Do NOT remove the grounding
prong from the plug.
1
F-41141 (11-09)