Automatic Send; Selection Of Transmission Method; Memory Transmission; Direct Transmission - Kyocera TASKalfa 2550ci Operation Manual

Automatic Send

General transmission using the numeric keys is explained.
NOTE:
To send an Internet FAX (i-FAX), refer to i-FAX Transmission on page 8-8.
Switching to the FAX Screen
Enter Destination.
ABCD abcd@efg.com
Pause Space
On Hook Direct Chain Detail
0001 0002 0003
AAA BBB CCC
0006 0007 0008
FFF GGG HHH
Destination Quick Setup Org./Sending
Data Format
Status

Selection of Transmission Method

There are two transmission methods - memory transmission and direct transmission. The default is memory
transmission.

Memory Transmission

After originals are scanned into memory, the communication starts. Scans all originals into memory, then dials
and sends.
Memory Transmission (When originals are placed in the document processor):
After originals placed in the document processor are scanned and stored in the memory, the receiving system
is dialed. This method is very convenient because you can have originals returned to you without waiting for
sending of the originals to be completed. It is suitable for sending multiple-page sheet originals.
Memory Transmission (When originals are placed on the glass surface):
This method is suitable for sending book originals that cannot be placed in the document processor. After
originals placed on the glass surface are scanned and stored in the memory, the receiving system is dialed.
NOTE:
When continuous scan is set, you can continue with scanning of a next original after an original on
the glass surface has been stored in memory. Every time one page is scanned, you perform an operation to
allow continued scanning, and after all the originals have been stored in memory, the receiving system is
dialed.

Direct Transmission

Dials the receiving system, and after the communication has started, originals are scanned. In direct
transmission, you can designate only one destination for one transmission.
Direct Transmission (When originals are placed in the document processor):
After the telephone line has connected with the receiving system, scanning of the originals placed in the
Destination
Address
001/001
Book
FAX No.
Entry
Backspace
Delete Recall
Check
Destinations
0004 0005
No.
DDD EEE
0009 0010
1/100
III JJJ
Image Quality Advanced Program
Setup
12/12/2011 10:10
Check that the basic FAX screen is displayed.
If the basic FAX screen is not displayed, press the
FAX key. The screen for FAX appears.
3-4
FAX Operation (Basic)