Printing Administrative Reports
You can print various administrative reports to check the results of fax transmission or the status of the functional
setup.
Send Result Reports
Each time you send a fax, you can print a report to confirm whether the fax was sent successfully. You can also
print the transmitted image in the send result report.
Report - FAX
Print a report of FAX transmission results.
* Results including E-mail/Folder in multiple destinations are also printed.
Off
Attach Image
On
Error Only
Off
Partial Image
Status
With transmitted image
Send Result Report
Completed
Report for Job Canceled before Sending
Print a send result report when the job is canceled before being sent.
Checking Transmission Results and Registration Status
1
2
3
Full Image
Cancel
OK
12/12/2011 10:10
4
1
2
3
4
5-7
Press the System Menu key.
Press [Report], and [Next] of Result Report Setting.
Then press [Next] of Send Result Report and
[Change] of FAX.
Press [Off] (not to print), [On] (to print), or [Error
Only].
If you selected [On] or [Error Only], you should then
indicate whether the transmitted image is to be
attached by selecting [Off] (do not print transmitted
image), [Partial Image] (print transmitted image at
full size) or [Full Image] (print all of the transmitted
image).
Press [OK].
Without transmitted image
Send Result Report
Completed
Press the System Menu key.
Press [Report], [Next] of Result Report Setting,
[Next] of Send Result Report and then [Change] of
Canceled before Sending.
Press [Off], [On].
Press [OK].
5