Figure 3. Configuration Jumpers - Intel S5000PSL - Server Board Motherboard User Manual

Jumper Name
Password Clear
(J1D2)
BMC Force Update
(J1E3)
8
Pins What Happens at System Reset
1 - 2 Protect password: These pins should be jumpered for
normal operation.
2 - 3 Erase password: If these pins are jumpered, then the
password will be cleared on the next server boot. These
pins should not be jumpered for normal operation.
To use this jumper to reset the password: Power down the
server. Place the jumper on pins 2 - 3. Power on the
server and wait 5 to 10 seconds. Power down the server.
Move the jumper back to pins 1 - 2. Power on the server.
1 - 2 Disable force update: These pins should be jumpered for
normal operation.
2 - 3 Enable force update: Jumpering these pins forces a BMC
update.

Figure 3. Configuration Jumpers

®
Intel Server Board S5000PSL