Manual Reception; Flow Of Reception - Kyocera TASKalfa 205c Operation Manual

Receiving Faxes > Manual Reception

Manual Reception

This method allows you to receive faxes by pressing [Manual RX] after confirming that the telephone line has connected
to the sending system.

Flow of reception

1
2
3
NOTE
To use Manual Reception, you need to change the receiving mode to Manual Reception. To
change to manual mode, refer to Reception on page 9-8.
Connecting a telephone set (commercially available product) to this machine enables you to
receive originals after talking to the person at the sending system.
The machine receives a call.
When the machine receives a call, it rings.
Press [On Hook].
Press [On Hook] to establish the connection.
Press [Manual RX].
Ready to send.
On Hook
0123456
Manual RX Line Off
After the sending side has started transmission, the machine starts receiving the
originals.
Ready to send.
FAX
On Hook Chain Direct
Recall
Address Book Ext Address Book
Functions
10:10
5-7
10:10
Dest. :
Check
Add Dest.
One Touch Key
Favorites