Manual Reception - Kyocera TASKalfa 205c Operation Manual

Using a Connected Telephone > Manual Reception

Manual Reception

Use this method when you want to receive originals after talking to the person at the sending system.
1
2
3
4
5
6
NOTE
FAX Automatic Reception has been preset for the receiving mode of this machine. To use
Manual Reception, you need to change the receiving mode to Manual Reception. To change
to manual mode, refer to
The telephone rings.
When there is an incoming call, the telephone connected to the machine makes a ringing tone.
Lift the handset.
Lift the handset of the telephone.
Check if the telephone line has connected to the fax of the sending
system.
If the destination is a fax machine, you will hear soft beep sounds. If a person answers, you
can talk to that person.
Press [On Hook].
1
2
Press [Manual RX].
Ready to send.
On Hook
0123456
Manual RX Line Off
Reception will start.
NOTE
When using a telephone set that can send tone signals, use the telephone to start the
reception of originals with the remote switch function. (Refer to
.)
page 7-10
Replace the handset.
When reception starts, return the handset to its original position.
.
Reception on page 9-8
Ready to send.
FAX
On Hook Chain Direct
Recall
Address Book Ext Address Book
Functions
10:10
7-9
10:10
Dest. :
Check
Add Dest.
One Touch Key
Favorites
Remote Switch Function on