Adjustment/Maintenance - Kyocera TASKalfa 205c Operation Manual

Fax Settings > Default fax settings
Item
Rings(FAX/TEL)
Reception
Remote SW Dial
Encrypted Reception
TX/RX Restriction
This function allows you to send or receive originals only when communication requirements are met.
For details, refer to Transmission Restriction on page 9-9.
RX/Forward Requirements
When you have received a fax, you can forward the received image to other faxes and computers or specify a number of
copies.
For details, refer to Memory Forwarding on page 6-2.

Adjustment/Maintenance

Adjust printing quality and conduct machine maintenance.
Service Setting
Item
FAX Call Settings(Europe only)
Exchange Selection
Dial No. to PSTN
If the reception method is FAX/TEL Auto Switch Reception, the number of rings until the
machine answers a call can be changed as needed.
Value: 0 - 15
For Rings (FAX/TEL), this change is possible with some countries.
Select the reception mode.
Value: Auto (Normal), Auto (FAX/TEL), Auto (Answering Machine), Manual, Auto (DRD)
If Auto (DRD) is selected, select the DRD Pattern.
Value: Pattern 1 (Normal Ring), Pattern 2 (Double Ring), Pattern 3 (Short-Short-Long), Pattern
4 (Short-Long-Short)
DRD reception mode is available for some countries.
For details, refer to DRD Reception (Available for inch versions only) on page 7-6.
To start fax reception by operation from the connected telephone set, use the following
operation.
Value: 00 - 99
For details, refer to Remote Switch Function on page 7-10.
Turns on reception by encrypted communication.
Value: On, Off
If turned on, select the encryption key.
For details, refer to Encryption on page 6-36.
When using this machine in environment in which PBX for connection to multiple phones for
business use is installed, perform the following PBX setting.
If the machine is connected to a PBX, set [PBX].
Value: PBX, PSTN
Set a number to access an outside line. For the number, contact the PBX administrator.
Value: 0-9, 00-99
Description
Description
9-8