Maintaining and Transporting the Printer
You see a screen like the following:
3. Click the
Nozzle Check
4. Click
to print the nozzle check pattern.
Print
5. Examine the nozzle check pattern to make sure it has no gaps or lines.
If the printout looks okay as shown below, you're done. Click
•
.
Finish
If you see any gaps as shown below, click
•
head and follow the on-screen instructions.
6. If the nozzles do not clear after a few cleaning cycles, run a Power
Cleaning Cycle, as described in the next section.
101
icon.
Clean
|
101
to clean the print